What is the difference between carbon steel and stainless steel
Release Time :
2024-08-01 11:18
1. Different densities
The density of carbon steel is slightly higher than that of ferritic and martensitic stainless steel, but it is lower for austenitic stainless steel, so the difference between carbon steel and stainless steel is different.
2. Resistance difference
It can be said that the resistivity increases in the order of carbon steel, ferrite, martensite and austenitic stainless steel, so the resistance of carbon steel and stainless steel is different.
3. Different linear expansion coefficients
The size and order of the linear expansion coefficient are arranged in the order of austenitic stainless steel being the highest and carbon steel being the smallest, so the linear expansion coefficient between the two is different.
4. Different magnetic properties
The martensite produced by cold work hardening will produce certain magnetism during transformation. At this point, heat treatment can be used to eliminate this martensitic structure and restore non magnetic properties. Austenitic stainless steel is non magnetic, while carbon steel, ferrite, and martensitic stainless steel are magnetic.
5. Different ingredients
Stainless steel belongs to weakly corrosive media such as air, steam, and water, and contains certain chemicals such as acids, alkalis, and salts; Carbon steel is an iron carbon alloy with a carbon content ranging from 0.0218% to 2.11%, which contains a certain amount of silicon, manganese, sulfur, and phosphorus.
RELATED NEWS
2026-10-08
ASTM A36 vs. Q235 Steel: Chemical Composition, Properties and Equivalents
This article compares ASTM A36 and Q235 structural steel, covering chemical composition, mechianical properties, common applications, and grade equivalence, while introducing Bao Metal as a supplier for international steel buyers. When sourcing carbon steel plates, you've probalbli come across ASTM A36 and Q235. Both are widely used in construction and manufacturing, but are they actually the same? Understadning their differences can help you choose the right material and avoid costlu purchasing mistakes.
2026-09-17
How Surface Decarburization Can Affect Machined and Heat-Treated Steel Parts
This article explains how surface carbon loss develops during heating and how it can reduce the hardness, wear resistane, fatigue life, and dimensional reliability of finished steel parts. Surface decarburization occurs when carbon near the surface of steel reacts with the furnace atmosphere during heating. The carbon content in this outer layer decreases, leaving it softer than the material underneath.
2026-09-11
How Stainless Steel Surface Finishes 2B, No.1, BA and No.4 Differ
This article explains the differences between common stainless steel finished such as 2B, No.1, BA, and No.4, including their appearance, processing methods, and typical applications. When buyers compare stainless steel sheet or plate, the grade is only part of the specification. The surface finish can also affect appearance, formability, cleaning, downstream polishing, and final use. Finishes such as 2B, No.1, BA, and No.4 are not simply comestic labels. You can think fo them as different surface conditions created by different processing routes, each suited to do a different job.
2026-08-21
How to Calculate Steel Plate Weight from Thickness, Width and Length
This article explains how to calculate the theoretical weight of a steel plate using thickness, width, length, and steel density, while showing buyers why dimensions and tolerances still matter when placing an order. When you buy steel plate, weight is often used to calculate quantity, freight, and total order value. Fortunately, you do not need complicated software to estimate it. If you know the plate thickness, width, and length, you can calculate the theoretical weight with a simple formula. Think of it like calculating the volume of a box and then asking how heavy the material inside that box is.