Performance index of steel pipe
Release Time :
2021-11-15 13:33
The mechanical property of steel is an important index to guarantee the final serviceability (mechanical property) of steel, which depends on the chemical composition and heat treatment system of steel. In the steel pipe standard, according to different use requirements, the tensile properties (tensile strength, yield strength or yield point, elongation) and hardness, toughness indicators, as well as user requirements of high, low temperature performance.
① Tensile strength (σb)
The stress (σ) obtained by dividing the maximum force (Fb) of the specimen at tensile break by the original cross-sectional area (So) of the specimen in the tensile process is called the tensile strength (σb), and the unit is N/mm2 (MPa). It represents the maximum capacity of a metal material to resist damage under tensile force.
② Yield point (σs)
For metal materials with yield phenomenon, the stress at which the specimen can continue to extend without increasing the force (keeping constant) during the tensile process is called yield point. If the force drops, the upper and lower yield points should be distinguished. The unit of yield point is N/mm2 (MPa).
Upper yield point (σsu) : the maximum stress of the specimen before the first drop in force due to yield; Lower yield point (σsl) : the minimum stress in the yield stage, excluding the initial instantaneous effect.
RELATED NEWS
2026-10-08
ASTM A36 vs. Q235 Steel: Chemical Composition, Properties and Equivalents
This article compares ASTM A36 and Q235 structural steel, covering chemical composition, mechianical properties, common applications, and grade equivalence, while introducing Bao Metal as a supplier for international steel buyers. When sourcing carbon steel plates, you've probalbli come across ASTM A36 and Q235. Both are widely used in construction and manufacturing, but are they actually the same? Understadning their differences can help you choose the right material and avoid costlu purchasing mistakes.
2026-09-17
How Surface Decarburization Can Affect Machined and Heat-Treated Steel Parts
This article explains how surface carbon loss develops during heating and how it can reduce the hardness, wear resistane, fatigue life, and dimensional reliability of finished steel parts. Surface decarburization occurs when carbon near the surface of steel reacts with the furnace atmosphere during heating. The carbon content in this outer layer decreases, leaving it softer than the material underneath.
2026-09-11
How Stainless Steel Surface Finishes 2B, No.1, BA and No.4 Differ
This article explains the differences between common stainless steel finished such as 2B, No.1, BA, and No.4, including their appearance, processing methods, and typical applications. When buyers compare stainless steel sheet or plate, the grade is only part of the specification. The surface finish can also affect appearance, formability, cleaning, downstream polishing, and final use. Finishes such as 2B, No.1, BA, and No.4 are not simply comestic labels. You can think fo them as different surface conditions created by different processing routes, each suited to do a different job.
2026-08-21
How to Calculate Steel Plate Weight from Thickness, Width and Length
This article explains how to calculate the theoretical weight of a steel plate using thickness, width, length, and steel density, while showing buyers why dimensions and tolerances still matter when placing an order. When you buy steel plate, weight is often used to calculate quantity, freight, and total order value. Fortunately, you do not need complicated software to estimate it. If you know the plate thickness, width, and length, you can calculate the theoretical weight with a simple formula. Think of it like calculating the volume of a box and then asking how heavy the material inside that box is.