PRODUCT CENTER
<strong>5083 belongs</strong> to Al-Mg-Si alloy, which is widely used, especially in the construction industry.<br> <strong>It is the most promising alloy. </strong>Good corrosion resistance, good weldability, good cold processing, and has moderate strength.<br> <strong>5083 is magnesium, </strong>which has good forming performance, corrosion resistance, weldability and medium strength. <br> <strong>5083 aluminum </strong>is one of the most widely used antirust<br>
<strong>Al-cu-mg-zn alloy,</strong> which is made by adding Zn on the basis of duralumin.<br> <strong>This kind of alloy </strong>is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum. <br> <strong>Disadvantage is also </strong>very poor corrosion resistance, can improve the artificial aging temperature or aluminum.
<strong>6063 aluminum alloy</strong> material. The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy. <br> <strong>6063 aluminum alloy</strong> profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
<strong>6061</strong> is a common duralumin with good machinability and moderate strength. <br> <strong>6061</strong> is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.<br> <strong>It can still </strong>maintain good operation after annealing.<br> <strong>If there is a certain </strong> amount of manganese and chromium, the bad effect of iron can be neutralized.
<strong>1060 aluminum plate</strong> is widely used in products with low strength requirements. <br> Products are often used in signs, billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
<strong>Thickness </strong> 0.1-400mm,etc<br/> <strong>Length:</strong>100-12000mm,or as required<br/> <strong>Width:</strong>20-3000mm,etc<br/> <strong>Standard:</strong>ASTM,AISI,JIS,GB, DIN,EN<br/> <strong>Certification:</strong>ISO, SGS,BV
we have different types of <strong>aluminum welding wire </strong> for sale, we have different types of stainless steel welding wire listed in each page, for example,<br> <strong>our aluminum welding wire</strong> is of good plasticity, S301 and ER1100 welding wire is suitable for gas shielded or submerged arc welding for corrosion resistant aluminum, S5356 and ER5356 aluminum welding wire is of good corrosion resistance and widely applied for submerged arc welding of aluminum alloy, especially for welding 5083 material.
<strong>Material alloy grade:</strong>1050.1060,1070<br/> <strong>Temper: </strong>O and H14<br/> <strong>length: </strong>10ft,20ft,25ft,20ft,50ft etc<br/> <strong>max working pressure:</strong>4.0Mpa<br/> <strong>Processing:</strong>Hot extruded
<strong>Thickness </strong> 0.1-400mm,etc<br> <strong>Length:</strong>100-12000mm,or as required<br> <strong>Width:</strong>20-3000mm,etc<br> <strong>Standard:</strong>ASTM,AISI,JIS,GB, DIN,EN<br> <strong>Certification:</strong>ISO, SGS,BV