PRODUCT CENTER
<strong>2036 aluminum</strong> this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good. <br> <strong>2036 aluminum alloy</strong> features: high strength, a certain heat resistance, can be used for working parts below 150℃. The strength of 2036 alloy is higher than that of 7075 alloy.
<strong>Al metal alloy:</strong> 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000 series etc<br> <strong>Alu temper: </strong>O - H112, T3 - T8, T351 - T851 etc<br> <strong>Thickness:</strong> 0.3mm - 6mm<br> <strong>Width: </strong>900mm - 1600mm
<strong>1100 aluminum alloy<strong> is 99.0% ordinary industrial pure aluminum. <br> <strong>Heat treatment <strong>can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;<br> <strong> After anodic oxidation,<strong> the corrosion resistance can be further improved and a beautiful surface can be obtained.
<strong>A finished Aluminium</strong> product such as strip which has been wound or coiled after rolling. <br> <strong>These Aluminium Strips </strong>are available in Al 99.5 and E-Al 99.7 pure aluminium 1050, 1060, 1070, 1100, 1145, 1200, 1350, 2024, 3003, 3004, 3005, 3104, 5005, 5050, 5052, 5056, 5182, 5252, 5657, 5754, 6061, 7075, 8006, 8011, 8079, 9020.<br> <strong>Re-rolled aluminum strip</strong> available in a wide range of precise thickness and width capabilities for consistent and tight gauge tolerances.
<strong>2024 aluminum alloy,</strong> the main alloying elements are copper and magnesium. <br> <strong>Applications</strong> where high strength but low weight ratio is required, and good fatigue strength. <br> <strong>Not weldable, </strong> general processing performance. Because of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.<br>
<strong>6082-T6 aluminum</strong> the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy. <br> <strong>Widely used</strong> in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
<strong>The mechanical properties</strong> of 2024-T3 aluminum alloy can be significantly improved after heat treatment. <br> <strong>2024 is a typical</strong> duralumin alloy in the aluminum-copper-magnesium system. It is a heat-treatable alloy with high strength, easy to work, easy to turn, and moderate corrosion resistance.
<strong>6082-T6 aluminum,</strong> the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy.<br> <strong>Widely </strong> used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
<strong>5052 aluminum </strong> is Al-Mg alloy aluminum, magnesium is the main alloy element in 5052 alloy aluminum <br> <strong>is the most widely </strong> used one kind of rustproof aluminum, this alloy has high strength, especially the fatigue strength: High plasticity and corrosion resistance, heat treatment can not be strengthened, in the semi-cold hardening plasticity is good, cold hardening plasticity is low, good corrosion resistance, good weldability,