We sincerely welcome all calls and letters to discuss business.
Phone: +8619026810578 Email: manager2@zgxzlmetal.com Whatsapp: +8619026810578
PRODUCT CENTER
<strong>Thickness: </strong>0.15-150mm<br> <strong>Port of Destination: </strong>Any port you like<br> <strong>Aluminium Sheets </strong>with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.<br> <strong>Because of its good</strong> energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
<strong>The main alloying elements in 6061</strong> alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. <br> Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
<strong>1100 aluminum alloy</strong> is 99.0% ordinary industrial pure aluminum. <br> <strong>Heat treatment</strong> can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;<br> <strong> After anodic oxidation, </strong> the corrosion resistance can be further improved and a beautiful surface can be obtained. <br>
<strong>6061 alloy </strong>are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.<br> Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; <strong>6061 aluminum plate</strong> its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
<strong>1100 aluminum alloy<strong> is 99.0% ordinary industrial pure aluminum. <br> <strong>Heat treatment <strong>can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;<br> <strong> After anodic oxidation,<strong> the corrosion resistance can be further improved and a beautiful surface can be obtained.
<strong>Thickness: </strong> 0.15-150mm<br> <strong>Port of Destination:</strong> Any port you like<br> <strong>Aluminium Sheets</strong> with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry. <br> <strong>Because of its good </strong> energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
<strong>Aluminium Steel Round Bars</strong> which exhibits exceptional corrosion resistance in chemical environments containing phosphoric acid, nitric acid, chlorides and sulphuric acid. <br> <strong>Aluminium 6061 </strong>Square Bars doesn’t losses it shape when exhibit to a temperature of liquid nitrogen which is also high appreciable and has a great commercial demand.<br> <strong>For applications </strong>requiring maximum ductility, Aluminium 6082 Flat Bars with low sulphur levels can be supplied by producers using ladle – refining techniques. <br>
<strong>A finished Aluminium </strong> product such as strip which has been wound or coiled after rolling. <br> <strong>These Aluminium Strips</strong> are available in Al 99.5 and E-Al 99.7 pure aluminium 1050, 1060, 1070, 1100, 1145, 1200, 1350, 2024, 3003, 3004, 3005, 3104, 5005, 5050, 5052, 5056, 5182, 5252, 5657, 5754, 6061, 7075, 8006, 8011, 8079, 9020.<br> <strong> Re-rolled aluminum strip </strong> available in a wide range of precise thickness and width capabilities for consistent and tight gauge tolerances.
<strong>2036 aluminum</strong> this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good. <br> <strong>2036 aluminum alloy</strong> features: high strength, a certain heat resistance, can be used for working parts below 150℃. The strength of 2036 alloy is higher than that of 7075 alloy.
<strong>Al metal alloy:</strong> 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000 series etc<br> <strong>Alu temper: </strong>O - H112, T3 - T8, T351 - T851 etc<br> <strong>Thickness:</strong> 0.3mm - 6mm<br> <strong>Width: </strong>900mm - 1600mm
<strong>1100 aluminum alloy<strong> is 99.0% ordinary industrial pure aluminum. <br> <strong>Heat treatment <strong>can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;<br> <strong> After anodic oxidation,<strong> the corrosion resistance can be further improved and a beautiful surface can be obtained.
<strong>A finished Aluminium</strong> product such as strip which has been wound or coiled after rolling. <br> <strong>These Aluminium Strips </strong>are available in Al 99.5 and E-Al 99.7 pure aluminium 1050, 1060, 1070, 1100, 1145, 1200, 1350, 2024, 3003, 3004, 3005, 3104, 5005, 5050, 5052, 5056, 5182, 5252, 5657, 5754, 6061, 7075, 8006, 8011, 8079, 9020.<br> <strong>Re-rolled aluminum strip</strong> available in a wide range of precise thickness and width capabilities for consistent and tight gauge tolerances.
CONTACT US
Tel: +8619026810578
Email: manager2@zgxzlmetal.com
Whatsapp: +8619026810578
Add: Qingdao City, China
Copyright : Qingdao Xinzhonglian Steel Co., Ltd. Seo BUSINESS LICENSE